 |
|
 |
||||||||||||||||||||||
|
Contour Tank Liners Our contour tank liners for biopharmaceutical fluid containment and processing offer the following unique benefits:
Overview Charter Medical's single use, Contour Tank Liners are a cost-effective alternative to dedicated tanks & carboys. Contour liners reduce cleaning validation and sterilizing of traditional containers. Most importantly, because they are single use, the problem of cross-contamination between different products is reduce. One rigid plastic container equipped with a fresh liner can be used to process and mix a variety of different products. Typical Applications:
All Contour Tank Liners are non-cytotoxic, non-pyrogenic, and meet the requirements of the USP Class VI Biological Test for Plastics. Product Catalog Contour Tank Liners
Features and Benefits Design Features Charter Medical's Contour Tank Liners are the most form-fitting product available, designed to minimize wrinkles. During mixing, the homogeneity of the product can be jeopardized by the presence of wrinkles in the liner. Wrinkles create pockets that can harbor the additives and shield them from mixing. Later, when the fluid is removed from the container, the unblended components unload from the pockets and alter the concentration of the batch. These problems are minimized with our design. Centering Indicator If a liner is not properly centered, the film will "stand-off" from the wall of the tank and create wrinkles on the opposite side. This stresses the freestanding plastic and provides an unsupported surface that can be more easily punctured. Ours have a centering indicator on the bottom of the liner that helps the operator keep the liner centered in the tank during the critical first few minutes of product fill. Fit All Contour Tank Liners fit into standard industry containers with unparalleled snugness. The unique hexagonal weld pattern makes them truly form-fitting, and the diameter of the liner very nearly matches that of the tank. Since this makes it impossible for the bag material to be pulled over the tank rim, carefully located flaps on the liner extend up and over the container rim. The flaps secure on the outside of the tank with Velcro™ and keep the mouth of the bag open during product fill. A single operator can easily install a liner in any size tank in just a few minutes. Construction
(This layer is bonded to a multi-layer composite barrier film. The proprietary barrier film layer provides added strength and has very low gas and moisture vapor permeability.)
Validation
 |
||||||||||||||||||||||||
 Charter Medical | 3948-A Westpoint Blvd. | Winston-Salem, NC 27103 |
Toll Free: 866.458.3116 | Phone: 336.768.6447 | Fax: 336.714.4241
Contact Us | Privacy Policy | Site Map |
